Flanges
Weld neck flanges
For high-pressure, high-temperature lines in oil & gas and desalination, machined and drilled to standard.
- ASME B16.5
- NPS ½″–24″
- Class 150–1500
- A105 / F316L
Products built to standard
Flanges, tanks, structures and custom parts — all made in our Jeddah workshop, with material certificates and inspection reports.
Products
Product catalogue
Pick a category to filter. Every product can be tailored to your drawings.
-
Flanges
-
Flanges
Slip-on, blind & lap-joint flanges
Raised, flat or RTJ face in carbon or stainless steel for water, cooling and process lines.
- RF / FF / RTJ
- Class 150–600
- A105 / A350 LF2 / F304L
-
Flanges
Large & non-standard flanges
Large-diameter flanges to ASME B16.47 or to drawing, cut from thick plate and precision machined.
- ASME B16.47 A/B
- OD up to 3000 mm
- Up to 150 mm thick
-
Tanks
Potable water tanks
Vertical and horizontal tanks with potable-grade epoxy lining and a hydrostatic test before handover.
- API 650
- Capacity: 5–2,000 m³
- Holiday-tested lining
-
Tanks
Fuel & diesel tanks
Single or double wall, above-ground or skid-mounted, with manholes, ladders and level gauges.
- Double wall
- Leak tested
- API 650 / UL 142
-
Tanks
Stainless process tanks
304L and 316L tanks with an easy-clean internal finish for food, dairy and chemical plants.
- SS 304L / 316L
- 2B or polished interior
- Pickled & passivated welds
-
Structures
Steel warehouses & hangars
Portal frames and trusses for warehouses, factories and workshops, with cladding, doors and accessories.
- AWS D1.1
- Clear spans up to 60 m
- Galvanised or painted
-
Structures
Pipe racks, platforms & stairs
Pipe racks, access platforms, stairs and handrails with grating floors for plants and treatment works.
- AWS D1.1
- Galvanised grating
- Site erection
-
Custom parts
Laser & plasma cut parts
From DXF to finished part: base plates, brackets, sprockets, architectural panels and machine parts.
- Laser up to 40 mm
- ±0.1 mm
- One-off to thousands
-
Custom parts
Bent & rolled parts
Channels, angles, folded sections, rolled cylinders and cones to drawing.
- Bending up to 6000 mm
- Rolling up to 30 mm
Materials we work with
-
ASTM A36
-
S355JR
-
ASTM A516 Gr.70
-
ASTM A105
-
SS 304L
-
SS 316L
-
Duplex 2205
-
AL 5083
-
Hardox 450
-
Corten A
-
Galvanised G90
Quality
Standards we work to
Every shipment leaves the workshop with material certificates and inspection reports.
-
ASME B16.5
Flange dimensions and pressure classes from ½″ to 24″, with B16.47 for larger sizes.
-
API 650
Design and fabrication of welded tanks for water and fuel storage.
-
AWS D1.1
Structural welding of steel by qualified welders.
-
EN 10204 3.1
Mill inspection certificates that trace every plate and flange to its heat.
Made to order
Can’t find what you need?
Most of our work is made to the customer’s drawing. Send a drawing or a photo with dimensions and we will propose the right material and process.
Ready to order?
Send your bill of quantities and we will reply with price and delivery within one working day.